1. print icon 印刷

MAGPOWR DTR-65 Digital Tension Readout

  • Small panel usage, 1/8 DIN enclosure (same as DTR)
  • Setup and calibration through keypad and digital display
  • Weightless load cell calibration
  • Outputs and display have fully adjustable and separate digital filtering
  • One push button for re-zeroing, with optional input for remote re-zeroing
  • Alarm output for high tension or low tension or high or low tension
  • Works with 5 and 7.5 volt excitation sensors with 1.5 to 100 mV/V signals
  • 32:1 gain adjustment
  • Automatic load cell diagnostics/fault indicator
  • Powered with 24 VDC or 100 to 240 VAC

MAGPOWR DTR-65 Specifications

  • 输入
  • 张力感应器励磁5 or 7.5 VDC, 100mADC maximum
  • 张力感应器灵敏度1.5 to 100 mV/V single sensor or pair
  • 数据输入(复零)24 VDC maximum, 5 VDC or 24 VDC selectable threshold
  • 输出
  • 模拟0 to 10 VDC, 5mA, 2 kohm minimum load
    4 to 20 mADC, 450 ohm maximum load
  • 基准仪表0 to 1 mADC, 1 kohm maximum load
    or 0 to 10 VDC, open circuit
  • 报警器30 VDC maximum, 0.4 ADC maximum
  • 增益32:1
  • 电源24 VDC, +/- 10%, 0.14 ADC maximum or
    100 to 240 VAC +/- 10%, 50 to 60 HZ, 0.09A
  • 显示4-digit LED
  • 安装1/8 DIN panel mount
  • 气候等级3K3 (EN60721)
  • 工作温度
  • 直流电源0 to 50˚ C32 to 122˚ F
  • 驱动器0 to 45˚ C32 to 113˚ F
  • 仓储温度-20 to 80˚ C-4 to 176˚ F
  • 护罩IP20 (back and sides)
    IP65 (front panel)
  • 证书CE
    TUV Mark (UL61010-10, CAN/CSA-C22.2#
    61010-1, CB to ICE 61010-1)
    RoHS

Certifications

The DTR-65 is an easy choice when needing a tension displayed on a machine panel with the option to also output a tension reference to a drive or PLC for remotely displaying or controlling tension.

A powerful and versatile panel-mounted digital amplifier used to display measured tension locally on a machine panel, the DTR-65 will multiply a millvolt tension signal to a usable 0 to 10 VDC and 4 to 20 mADC analog output.

The DTR-65 is an 1/8 DIN panel mount enclosure that is IP65 protected on the face. It incorporates ease of use and setup with a keypad and a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration.